Heat-flo is proud to announce the promotion of Robert LaPorte, from the position of Senior Manufacturing Engineer and Quality Manager to Operations Manager as of April 22nd, 2022. The promotion is made in recognition of his outstanding Engineering and Quality Management skills.
Heat-flo would like to welcome a new sales rep! Hydronic systems will be representing Heat-flo in Quebec and Ontario! Their years of experience providing high quality hydronic solutions to the Canadian market have made them an ideal partnership for Heat-flo. We excited to have a good standing, strong relationship with them for years to come! Welcome to the family Hydronic Systems Canada Inc!
Heat-flo is pleased to announce the appointment of Proctor Sales as our representatives in Washington, Oregon, Northern Idaho and Alaska. Since 1957, Proctor Sales has been the premier sales and technical resource for boiler, steam and hydronic products in the Pacific Northwest.
Proctor Sales prides themselves in representing the “best in class” market leaders in hydronic solutions-making Heat-flo a perfect fit!
If you are a homeowner who has just found out about Heat-flo products, the way we sell may seem a bit confusing. We wanted to answer some of your questions so you can be prepared and know the steps you need to take.
Heat-flo had its’ Surveillance 2 audit of the ISO 9001:2015 quality system on October 1st. This type of audit is completed by an outside auditor and involves reviewing the quality system and how effective it is at making sure any defects are caught and repaired before the customer receives any product.
Heat-flo is pleased to announce new representation in Minnesota, Wisconsin, North and South Dakota, and the Upper Peninsula of Michigan. Schroeder Sales is a welcome addition to our international family of sales representatives.
A third-generation company, Schroeder Sales has a reputation for enhancing their customer’s businesses by positioning them with products and services that help them achieve their goals and objectives in innovative ways.
Here at Heat-flo, we just want to say welcome to the team Schroeder Sales! We are very happy to have you!
In 2014 Heat-flo, Inc. began producing all products with magnesium anode rods as a way to combat corrosion in aggressive water situations. The magnesium anode rods worked very well, as we expected, but they didn’t last as long as we felt they should and actually caused an annoying issue for the homeowner. That issue was a burst of air when the hot water was initially used after hours of being idle.
After much research it was determined the use of an aluminum anode rod will correct the burst of air problem most of the time, and they last longer. As a result of this research, we began producing products with the aluminum anode rod toward the end of 2020.
Providing for your water heating needs is something we always take seriously at Heat-flo. As an essential business, we have been fortunate to remain open and fully operational during this COVID-19 pandemic. The health and safety of our team members, their families and our community are our top priorities.
In an effort to continuously improve our products, Heat-flo upgraded their tank insulation during 2019 to a two-part urethane insulation. The two-part urethane insulation that is being used is a high R-value HFO based system that is free of HFCs. Heat-flo is ahead of the upcoming phase out of HFC based insulations that are required by California as of Jan. 2020, and by Canada as of Jan. 2021. The insulation has a global warming potential of 1 and an ozone depletion potential of 0. All tanks have been upgraded to R-16+ insulating value.
Heat-flo will be in Sunny Orlando for the 2020 AHR Expo Tradeshow, happening February 3-5. 2019 brought us many exciting changes, a new product line for starters. Come by Booth 2490 to see our all new line of Stainless Steel Electric Commercial and Light Commercial Water Heaters. While visiting us at booth 2490 be sure to congratulate Guy Woollard on his promotion to National Sales Manager.
Heat-flo is pleased to announce the addition of two lines of commercial electric water heaters to our already comprehensive line of stainless steel indirect water heaters, storage tanks and buffer tanks. The new electric water heaters are available in Light Commercial and Commercial configurations.
Heat-flo is proud to announce the promotion of Guy Woollard from the position of Eastern Territory Manager to National Sales Manager as of November, 2019.
Upon completion of an extensive quality system evaluation, Heat-flo Inc., located in Uxbridge, Massachusetts, announced receipt of its ISO 9001:2015 certification. This globally recognized certification of quality management system standards is consistent with Heat-flo’s commitment to creating and maintaining quality processes that ensure consistency, visibility, and accountability across its business operations in the design, development and manufacturing of indirect and electric water heaters, hot water storage and hydronic buffer tanks, and product solutions serving the hydronic heating industry.
Heat-flo, Inc. is an American owned and operated company that specializes in the design, manufacturing, and production of Stainless Steel Tank-Type Water Heaters. Their main line of products include Indirect-Fired Water Heaters, Hydronic Buffer Tanks, Booster/Storage Tanks, Multi-Energy Tanks, and Electric Tanks.
AHR 2019, held in Atlanta January 14-16 was extremely busy, we thank you all for stopping by! There was a lot of interest is our new line of Stainless Steel Commercial Electric Water Heaters as well as Heat-flo High Output Indirect Water Heaters.
We have some exciting things in the works for this year so stay tuned!
Heat-flo, Inc. is excited to announce the addition of new products to our family of Stainless Steel Hydronic Buffer Tanks! We now offer a 30 gallon buffer tank with top mount connections AND a full line of 5 Connection Commercial Buffer Tanks, available in 40, 60, 80 or 115 gallon sizes.
We now manufacture a line of Stainless Steel Buffer Tanks designed specifically for those demanding commercial applications. 5 Connections simplify the piping needed when banking together multiple buffer tanks in commercial applications.